Video clip

Tỉ giá ngoại tệ

Giá vàng

Vàng
Mua
Bán
SBJ
SJC

Đang truy cập: 14

Tổng truy cập: 27505678

Sản phẩm nổi bật

Glidden Satin Exterior Emulsion Bookmark and Share

Special Features:

Semi satin for luxurious wall finish

-     High durability

-     Anti fungus and algae

-     Waterproof (in normal conditions)

-     Protect walls from UV

-     6-year protection

PRODUCT NAME

Glidden Satin Exterior Emulsion
P roduct Code             A929-line

PACK SIZE 5L & 18L

USAGE

Glidden Satin is a high quality, 100% acrylic based emulsion paint for new or previously painted masonry and plaster surfaces. It is specially  formulated  to  protect  and  decorate  walls  with  below attributes

-     Semi satin for luxurious wall finish

-     High durability

-     Anti fungus and algae

-     Waterproof (in normal conditions)

-     Protect walls from UV

-     6-year protection

Above attributes are obtained only on obeying recommended paint system and application of ICI.

COLOUR RANGE

FILM PROPERTY

A n ti dirt pick -u p

Ch em ical

R esistance

W ater R esistance

See Glidden Colour Catalogue

Good anti dirt pick-up in normal conditions

Also  depending   on   the   pollution   levels   of   the   environment, construction designs, evenness/flatness of the wall surfaces.

Resistant to mild atmospheric fume attack and to light levels of alkali in mortar.

Resistant to the levels of atmospheric humidity normally experienced in exterior environments.

COMPOSITION Pigment: Lightfast Non-Lead Pigments.
(nominal)

DRYING TIMES

Su rface D ry

R ecoat

THEORETICAL COVERAGE

APPLICATION TOOLS

THINNING CLEANING UP

SURFACE PREPARATION

Binder   : Acrylic Emulsion

Solvent  : Water

& Additives

Single wet coat at standard thickness 100 micron:

30   minutes   depending   on   temperature  and   humidity   of   the environment

1 – 2 hours.

The paint film get cured 7 days after application in normal condition

(environment temperature is 30oC, humidity of environment is 80%)

On smooth surfaces of average porosity 10-12m2/liter/coat.

Brush, roller, conventional spray. Maximum additional 10% of clean water

Clean all equipment with clean water immediately after use.

 

-     Ensure the surface to be painted is clean, dry, the relative humidity is under 16% according to Protimeter or let the substrate from 21 to


28  days  in  normal  conditions  (average  temp. 30oC,  humidity  of environment is about 80%).

-   Large cracks need appropriate filling and treatment. Also need appropriate waterproofing at damped areas like wall foots, balcony, etc…

-     For old wall surfaces with peelings off, mould, remove the old paint film with appropriate tools. Treat area affected by mould, lichen, algae or moss with Dulux Fungicidal Wash (A980-19260). Use Dulux Weathershield Alkali Resistant Sealer   (A936 – 75230) for better adhesion

 

Notes: Do not apply Glidden Satin in wet weather (the temperature of surface for application should not be under 100C).

 

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION


-     Do not contain lead and mercury

-     Avoid  contact  with  skin.  May  cause  sensitisation  by  skin contact.

-     Harmful to aquatic organisms, may cause long-term adverse affects in the aquatic environment.

-     Keep out of reach of children.

-     Do not breathe vapour/spray.

-     Wear suitable gloves.

-     Use only in well ventilated areas.

-     Avoid release to the environment.

-     Wear suitable eye glasses when application. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice immediately.

-     In case of swallowing the paint, get medical care immediately and bring along the paint can or brand.

-     Do not release to sewers or water supplies

-     In case of spilling over, collect with sand or soil.

-     Dispose of any paint waste in accordance with the appropriate

Environment Quality Regulations

>> Sản phẩm cùng loại

Toa Nanoshield Exterior

NaNoShield

Giá bán : 510.000

1 2