Video clip

Tỉ giá ngoại tệ

Giá vàng

Vàng
Mua
Bán
SBJ
SJC

Đang truy cập: 39

Tổng truy cập: 27497223

Sản phẩm nổi bật

TOA SUPERSHIELD MAJESTIC GOLD Bookmark and Share

Packing/ Price:

Special Features:

It is suitable for application on both exterior and interior plaster, concrete, brick, gypsum board, for example around church area, pagoda, pavilion...

Description

SuperShield Majestic Gold is a high quality emulsion paint that is made of 100% pure acrylic resin and premium grade gold powder from USA.  It gives extra glow finish and excellently resists to servere tropical climates, fungus and lichen.

 

Typical Uses

It is suitable for application on both exterior and interior plaster, concrete, brick, gypsum board, for example around church area, pagoda, pavilion, the elongated and elaborately carved apex of the gable of a Buddhist temple, and an image of Buddha.

Physical Properties

Type                 100% pure acrylic emulsion paint

Component :

Pure Acrylic Binder,Pigment       60 % approximately

Water                            30 % approximately

Additive                                    10 % approximately

Color                Gold

Finish               Sheen

Specific Gravity                        1.10-1.12

%Solid by Volume                    40-42

%Non Volatile               38-40

Theorectical Coverage               33 - 38  m2/g/coat approx.

 

Application Method

Tools                Brush,Spray

Thinner              Clean Water

Thinning Ratio

For spraypaint, dilute with 100-150% of clean water by volume.

For brushing or rolling, dilute with 30-50% of clean water by volume.

The given figure is the average data from practical use.

This product is produced to be ready-to-use. However, the dilution could be done depending on the variation of atmosphere temperature and humidity

 

Paint System

Primer

- Apply 1-2 coats of SuperShield Acrylic Emulsion Primer (Shade as prefered)

Top Coat

- Apply 2-3 coats of SuperShield Majestic Gold Pure Acrylic Emulsion Paint

 

Application System

Surface Preparation

 

New Surface

- Leave the surface to be completely dried (approx. 1 months)

- Substrate must be completely cleaned from grease, dust and rust

 

Old Surface

- Thoroughly clean existing expired paint (do not use wired brush)

- The surface that has fungus and lichen must be cleaned by Hypocloride (bleach)

-  Clean with fresh water and leave it dried for 2-3 days

- Apply TOA Contact Primer

Precaution :

1. Keep away from children and avoid contact with eyes.

2. Stir well before use and once opened, entire contents should be used. Store in a cool ,shaded place.

3. Allow new surface to dry out around  21 -28 days in normal condition before painting.

4. Ensure correct primer and/or sealer is used  and allow putty  to thoroughly harden before painting

Disclaimer

This information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However,as the product is often used under conditions beyond our control,we cannot guarantee anything only the quality of the product itself. We reserve the right to change the given data without notice.

>> Sản phẩm cùng loại

Toa Nanoshield Exterior 5L

NaNoShield

Giá bán : 550.000

Giá cũ : 650.000