Video clip

Tỉ giá ngoại tệ

Giá vàng

Vàng
Mua
Bán
SBJ
SJC

Đang truy cập: 44

Tổng truy cập: 27505878

Sản phẩm nổi bật

Sikafloor ® 2430 Bookmark and Share

Special Features:

Quick drying

Abrasion  resistant

Good  chemical  resistance

Various  colour  shades  available

Desciption

Sikafloor  2430  is  a  solvent  containing  2-component  epoxy  top  coat.

Uses:

For coloured surface finish of lightly to medium exposed walls and floors of  concrete  or  cement  screed.

Main  fields  of  application:

Production  and  warehouse  facilities

Parking  lots  and  aircraft  maintenance  hangars

Food  and  beverage  industry

 

Advantages:

Quick drying

Abrasion  resistant

Good  chemical  resistance

Various  colour  shades  available

Form/Colour ,  Packaging,  Storage,  Shelf life

Ral  6011  (Reseda  Green)

 

Ral 7032 (Pebble Grey)

 

10 kg per set (component A + B)

 

Component A     :   7.0 kg pail

 

Component  B    :   3.0 kg pail

 

o                             o

Dry, cool, shaded place   (storage temperature from +5 C   to  +30   C)

 

 

Min.  24   months  if   stored  properly  in  unopened,  original  packaging

Technical   Data

Approx. 1.16  kg/ltr  (Comp. A + B)

 

Approx. 57%

 

Component A : B    =  7  :    3  (parts by weight)

 

2

0.15 - 0.20 kg/m   per coat

Application:

The substrates must be of sufficient strength (compressive strength mini-

2

mum  25  N/mm ).  The  surface  should  be  level,  solid  and  dry  as  well  as

free  from  loose,  friable  particles  and  oil,  etc.  The  pull-off  strength  should

2

be above 1.5 N/mm .

 

Maximum moisture content of substrate: 4%

 

A sound and clean substrate is of utmost importance, in particular as this

flooring system is a thin layer system, hence loads applied to the floor are

transmitted  to  the  substrate.

 

Cavities  or  defects  in  the  surface  should  be  levelled  with  suitable  mate-

rial  (e.g.  mortar  from  Sikafloor  94)  prior  to  treatment.    Repaired  spots

should  be  lightly  ground  prior  to  impregnating  and  sealing.

 

Prior to mixing, stir component A mechanically. Mix components A and B

intensively in the correct mixing proportions with an electric power stirrer

of approx.   300-400 rpm.

 

Mixing time is minimum 3 minutes but it may take longer until a homoge-

neous mixture is achieved. Fill mixed material into a clean container and

mix  again  shortly.

>> Sản phẩm cùng loại

Waterbars Yellow Met

220x220_otc_2471553jpg

Giá bán : 195.000

Waterbars Grey

chatchenkhechobetongsikahydrotitecjtype_1268377373

Giá bán : Call

SikaTop ® 121

f7c3fb92f466f38f57cb334f27a7288e

Giá bán : Call

SikaTop Seal 107

sikatopseal107_1268147420pjpeg

Giá bán : Call

SikaSwell ® S-2

sk_Topseal_107

Giá bán : Call

Sikasil ® E

885626ceb709362a7fb0b52c38669a7d

Giá bán : Call

1 2 3 4 5 ...>>