Video clip

Tỉ giá ngoại tệ

Giá vàng

Vàng
Mua
Bán
SBJ
SJC

Đang truy cập: 12

Tổng truy cập: 27505890

Sản phẩm nổi bật

Sikafloor ® 2530W New Bookmark and Share

Special Features:

Fast  curing

Good  hiding  properties  for  most  shades

Water  vapour  permeable

Excellent  carbonation  barrier

Desciption

Sikafloor  2530W  New  is  a  high-performance  colored,  two-component dispersion  based  on  epoxy  resin.

 

Uses:

For the production of colored sealing coats for light and medium exposure. On concrete, cement screed, epoxy mortar fiber cement boards, e.g. in pro- duction and storage halls, show rooms, garages, wet rooms, civil defense facilities. As deicing salt protection on tunnel walls and galleries not exposed to weathering.

 

Advantages:

Easy application

Good  chemical  and  abrasion  resistance

 

Visible  end  of  pot-life

Fast  curing

Good  hiding  properties  for  most  shades

Water  vapour  permeable

Excellent  carbonation  barrier

Resistant  to  mechanical  cleaning

Odorless  and  fungus  resistant

Solvent free

 

Product DA TA

Ral 1013 (Oyster white/cream)

Ral 6011 (Reseda Green)

Ral 7032 (Pebble Grey

 

Minimum  quantities  of  order  will  be  required  for  other  colour  shades

(depending  on  its  availability,  see  Sikafloor  colour  chart)

 

10 kg per set (component A + B)

 

Component A     :   7.0 kg pail

 

Component  B    :   3.0 kg pail

 

o                             o

Dry, cool, shaded place   (storage temperature from +5 C   to  +30 C)

 

Application:

 

Min.  12  months  if   stored  properly  in  unopened,  original  packaging

 

The substrates must be of sufficient strength (compressive strength mini-

2

mum  25  N/mm ).  The  surface  should  be  level,  solid  and  dry  as  well  as

free  from  loose,  friable  particles  and  oil,  etc.  The  pull-off  strength  should

2

be above 1.5 N/mm .

 

A sound and clean substrate is of utmost importance, in particular as this

flooring system is a thin layer system, hence loads applied to the floor are

transmitted  to  the  substrate.

 

Cavities  or  defects  in  the  surface  should  be  levelled  with  suitable  mate-

rial  (e.g.  using  Sikagard  75  Epocem)  prior  to  treatment.

 

Prior to mixing stir component A well. Mix component A+B intensively in the

recommended  mixing  ratio  by  means  of  an  electric  power  stirrer  (maxi-

mum  500  rpm).

 

Mixing time is minimum 3 minutes but it may take longer until a homo-

geneous mixture is achieved. Fill mixed material into a clean container

and mix again shortly.

 

>> Sản phẩm cùng loại

Waterbars Yellow Met

220x220_otc_2471553jpg

Giá bán : 195.000

Waterbars Grey

chatchenkhechobetongsikahydrotitecjtype_1268377373

Giá bán : Call

SikaTop ® 121

f7c3fb92f466f38f57cb334f27a7288e

Giá bán : Call

SikaTop Seal 107

sikatopseal107_1268147420pjpeg

Giá bán : Call

SikaSwell ® S-2

sk_Topseal_107

Giá bán : Call

Sikasil ® E

885626ceb709362a7fb0b52c38669a7d

Giá bán : Call

1 2 3 4 5 ...>>