Descption:

Sikafloor®  -2  Syn  Top  is  a  High  performance  synthetic    dry-shake  hardener  for  concrete  comprising  of  cement,hard  aggregates,compatible  admixtures  and  coloured  pigments.

Sikafloor®  -2  Syn  Top  contains  very  hard,  well-graded  natural  aggregates.

Uses, Advantages:

Sikafloor®  -2  Syn  Top  provides  a  hard  wearing,  dry  shake  topping  for  monolithic  floors.Whan  sprinkled  and  trowelled  into  fresh  wet  concrete  floors,it  forms  a  coloured,wear  resistant  smooth  surface..

Suitable  for  use  in  all    cases  where  floors  are  subjected  to  severe mechanical  wear  and  there  is  a  need  to  apply  special  hard  wearing surface  coverings,  such  as:

Cost effective,long life floor

Warehouses

Distribution  centers

Mechanical  engineering  workshops

Factories

Supermarkets  and  shopping  malls

Garages,  etc.

Aircraft  hangers.

Intrinsic  colouring

High  resistance  to  abrasion

Reduces  surface  dust

Improves  resistance  to  impact

Improves  resistance  to  oils  and  greases

Easy  application

Eliminates  the  need  of  a  monolithic  screed

Prodcut DATA

Powder

Grey, Green,

Minimum  quantities  of  order  will  be  required  for  other  colour  shades

25 kg bag

Dry,  cool,  shaded  place

Min.  12  months  if   stored  properly  in  unopened,  original  packaging

Aplplication:

As  soon  as  the  substrate  of  concrete  has  reached  plasticity  (after  bleeding, but before setting begins) smooth out the surfacing of the freshly poured concrete and level off with a vibrating straight edge.

Sprinkle the Sikafloor® 2 Syn  2Top mixture "by hand" over the smooth wet surface,  at  a  rate  of ~5  kg/m . Allow  the  Sikafloor®  2  Syn Top  to  absorb  moisture  from  the  substrate  and  when  evenly  moist,  consolidate,  power float the surface of the Sikafloor® 2 Syn Top.

As soon as the mixture becomes plastic or just as it is about to set, carry  out a pre-smoothing operation with the power float machine running at a low  speed  but  fitted  with  a  metal  blade's  at  a  minimum  inclination.  The final  smoothing  operation  (if necessary)  is  carried  out  some  time  later, but  with  the  power  float  machine  running  at  a  high  speed.

Sikafloor ®2 Syn Top mixture surface must be protected to prevent rapid water loss which can result in surface cracks.

Do  not  dispose  into  water  ways,drains  etc.

According to local law

Non  Hazardous

Sikafloor®  2  Syn Top  is  cement  base  and  is  therefore  alkaline.   Suitable precautions  should  be  taken  to  minimize  direct  contact  with  the  skin.   If the  material  gets  into  the  eyes,  rinse  immediately  with  clean  water  and seek  medical  attention.

The information, and, in particular, the recommendations relating to the application and end-use

of Sika products, are given in good faith based on Sika's current knowledge and experience of

the products when properly stored, handled and applied under normal conditions. In practice, the

differences in materials, substrates and actual site conditions are such that no warranty in

respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any

legal relationship whatsoever, can be inferred either from this information, or from any written

recommendations, or from any other advice offered.  The proprietary rights of third parties must

be observed.  All orders are accepted subject to our current terms of sale and delivery.  Users

should always refer to the most recent issue of the Technical Data Sheet for the product

concerned, copies of which will be supplied on request.